#1 zur zeit noch in benutzung als systemplatte. === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE family Device Model: WDC WD1200JB-32EVA0 Serial Number: WD-WMAEL1091760 Firmware Version: 15.05R15 User Capacity: 120.034.123.776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jun 02 01:06:18 2008 WS SMART support is: Available - device has SMART capability. Disabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3796) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 53) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 153 149 021 Pre-fail Always - 2866 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 321 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4720 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 289 194 Temperature_Celsius 0x0022 123 253 000 Old_age Always - 27 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 155 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ################################################################################################ ################################################################################################ #2 === START OF INFORMATION SECTION === Model Family: Western Digital Caviar family Device Model: WDC WD800BB-22CAA1 Serial Number: WD-WMA8E2018988 Firmware Version: 17.07W17 User Capacity: 80.026.361.856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jun 02 01:47:30 2008 WS SMART support is: Available - device has SMART capability. Disabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3120) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 58) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VA 1 Raw_Read_Error_Rate 0x000b 200 193 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 106 101 021 Pre-fail Always - 3766 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 576 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 10 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 15232 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 573 196 Reallocated_Event_Count 0x0032 197 197 000 Old_age Always - 3 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 145 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 145 occurred at disk power-on lifetime: 36 hours (1 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 53 50 ab e0 Error: UNC at LBA = 0x00ab5053 = 11227219 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 01 53 50 ab e0 00 19:41:32.450 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:32.450 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:29.850 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:29.850 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:27.300 READ DMA [OBS-5] Error 144 occurred at disk power-on lifetime: 36 hours (1 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 53 50 ab e0 Error: UNC at LBA = 0x00ab5053 = 11227219 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 01 53 50 ab e0 00 19:41:29.850 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:29.850 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:27.300 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:27.250 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:24.700 READ DMA [OBS-5] Error 143 occurred at disk power-on lifetime: 36 hours (1 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 53 50 ab e0 Error: UNC at LBA = 0x00ab5053 = 11227219 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 01 53 50 ab e0 00 19:41:27.300 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:27.250 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:24.700 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:24.700 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:22.100 READ DMA [OBS-5] Error 142 occurred at disk power-on lifetime: 36 hours (1 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 53 50 ab e0 Error: UNC at LBA = 0x00ab5053 = 11227219 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 01 53 50 ab e0 00 19:41:24.700 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:24.700 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:22.100 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:22.100 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:19.600 READ DMA [OBS-5] Error 141 occurred at disk power-on lifetime: 36 hours (1 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 53 50 ab e0 Error: UNC at LBA = 0x00ab5053 = 11227219 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 01 53 50 ab e0 00 19:41:22.100 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:22.100 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:19.600 READ DMA [OBS-5] 10 03 01 53 50 ab a0 08 19:41:19.550 RECALIBRATE [OBS-4] c9 00 01 53 50 ab e0 00 19:41:16.950 READ DMA [OBS-5] SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging ################################################################################################ ################################################################################################ #3 === START OF INFORMATION SECTION === Model Family: Western Digital Caviar family Device Model: WDC WD800BB-00CAA1 Serial Number: WD-WCA8E5457350 Firmware Version: 17.07W17 User Capacity: 80.026.361.856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jun 02 01:33:23 2008 WS SMART support is: Available - device has SMART capability. Disabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3120) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 58) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 102 100 021 Pre-fail Always - 3991 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 300 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 1 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 9479 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 189 189 000 Old_age Always - 152 198 Offline_Uncorrectable 0x0012 200 190 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 57 200 Multi_Zone_Error_Rate 0x0009 200 192 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] ################################################################################################ ################################################################################################ #4 === START OF INFORMATION SECTION === Model Family: Western Digital Caviar family Device Model: WDC WD1200BB-00DAA3 Serial Number: WD-WMACK1932338 Firmware Version: 75.13B75 User Capacity: 120.034.123.776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jun 02 01:35:17 2008 WS SMART support is: Available - device has SMART capability. Disabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (4585) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 61) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 151 146 021 Pre-fail Always - 5475 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 304 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2601 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 296 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] ################################################################################################ ################################################################################################ #5 === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 series Device Model: SAMSUNG SP1604N Serial Number: S013J10Y588724 Firmware Version: TM100-31 User Capacity: 160.041.885.696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Mon Jun 02 01:36:37 2008 WS SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (6000) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5440 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 528 5 Reallocated_Sector_Ct 0x0033 100 100 011 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Half_Minutes 0x0032 100 100 000 Old_age Always - 48h+39m 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 515 194 Temperature_Celsius 0x0022 112 112 000 Old_age Always - 42 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 67 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 051 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 051 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 9 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 occurred at disk power-on lifetime: 48 hours (2 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 01 4f c2 b0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d9 00 01 4f c2 b0 00 00:00:13.938 SMART DISABLE OPERATIONS ec 00 ff 01 00 00 b0 00 00:00:13.938 IDENTIFY DEVICE 10 00 ff 01 4f c2 b0 00 00:00:13.938 RECALIBRATE [OBS-4] 91 00 ff 01 4f c2 be 00 00:00:13.938 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 ff 01 00 00 b0 00 00:00:13.688 IDENTIFY DEVICE Error 8 occurred at disk power-on lifetime: 48 hours (2 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 01 4f c2 b0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d9 00 01 4f c2 b0 00 00:01:03.000 SMART DISABLE OPERATIONS ec 00 ff 01 00 00 b0 00 00:01:03.000 IDENTIFY DEVICE 10 00 ff 01 4f c2 b0 00 00:01:03.000 RECALIBRATE [OBS-4] 91 00 ff 01 4f c2 be 00 00:01:03.000 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 ff 01 00 00 b0 00 00:01:03.000 IDENTIFY DEVICE Error 7 occurred at disk power-on lifetime: 25 hours (1 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 4f c2 b0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 da 00 00 4f c2 b0 00 01:00:46.188 SMART RETURN STATUS c4 00 08 00 00 00 f0 00 00:45:57.500 READ MULTIPLE c4 00 01 00 00 00 f0 00 00:45:57.500 READ MULTIPLE ec 00 00 00 00 00 b0 00 00:45:57.500 IDENTIFY DEVICE c4 00 01 00 00 00 f0 00 00:45:57.500 READ MULTIPLE Error 6 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 4f c2 b0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 da 00 00 4f c2 b0 00 06:01:51.125 SMART RETURN STATUS Error 5 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 4f c2 b0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 da 00 00 4f c2 b0 00 05:01:39.438 SMART RETURN STATUS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging ################################################################################################ ################################################################################################ #6 === START OF INFORMATION SECTION === Model Family: Western Digital Caviar family Device Model: WDC WD800BB-00CAA1 Serial Number: WD-WMA8E3465822 Firmware Version: 17.07W17 User Capacity: 80.026.361.856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jun 02 02:00:03 2008 WS SMART support is: Available - device has SMART capability. Disabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3120) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 58) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 103 103 021 Pre-fail Always - 3900 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 153 5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always - 34 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 8329 10 Spin_Retry_Count 0x0013 098 097 051 Pre-fail Always - 7 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 140 196 Reallocated_Event_Count 0x0032 172 172 000 Old_age Always - 28 197 Current_Pending_Sector 0x0012 196 196 000 Old_age Always - 63 198 Offline_Uncorrectable 0x0012 200 199 000 Old_age Always - 11 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 100 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 13 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 13 occurred at disk power-on lifetime: 401 hours (16 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 03 94 87 f1 Error: UNC at LBA = 0x01879403 = 25662467 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 40 e8 93 87 f1 00 00:33:35.650 READ DMA [OBS-5] ef 03 45 01 00 00 b0 08 00:33:31.700 SET FEATURES [Set transfer mode] c6 03 10 01 00 00 b0 08 00:33:31.700 SET MULTIPLE MODE 10 03 3f 01 00 00 bf 08 00:33:31.650 RECALIBRATE [OBS-4] 91 03 3f 01 00 00 bf 08 00:33:31.650 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 12 occurred at disk power-on lifetime: 401 hours (16 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 03 94 87 f1 Error: UNC at LBA = 0x01879403 = 25662467 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 40 e8 93 87 f1 00 00:33:21.650 READ DMA [OBS-5] ef 03 45 01 00 00 b0 08 00:33:17.650 SET FEATURES [Set transfer mode] c6 03 10 01 00 00 b0 08 00:33:17.650 SET MULTIPLE MODE 10 03 3f 01 00 00 bf 08 00:33:17.650 RECALIBRATE [OBS-4] 91 03 3f 01 00 00 bf 08 00:33:17.650 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 11 occurred at disk power-on lifetime: 401 hours (16 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 03 94 87 f1 Error: UNC at LBA = 0x01879403 = 25662467 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 40 68 8d ee f3 00 00:33:09.300 READ DMA [OBS-5] c9 00 40 68 8d ee f3 00 00:33:06.650 READ DMA [OBS-5] c9 00 40 28 8d ee f3 00 00:33:06.650 READ DMA [OBS-5] c9 00 40 e8 8c ee f3 00 00:33:06.650 READ DMA [OBS-5] c9 00 40 a8 8c ee f3 00 00:33:06.650 READ DMA [OBS-5] Error 10 occurred at disk power-on lifetime: 401 hours (16 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 03 94 87 f1 Error: UNC at LBA = 0x01879403 = 25662467 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 40 e8 93 87 f1 00 00:32:52.600 READ DMA [OBS-5] ef 03 45 01 00 00 b0 08 00:32:48.600 SET FEATURES [Set transfer mode] c6 03 10 01 00 00 b0 08 00:32:48.600 SET MULTIPLE MODE 10 03 3f 01 00 00 bf 08 00:32:48.600 RECALIBRATE [OBS-4] 91 03 3f 01 00 00 bf 08 00:32:48.600 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 9 occurred at disk power-on lifetime: 401 hours (16 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 03 94 87 f1 Error: UNC at LBA = 0x01879403 = 25662467 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c9 00 40 e8 93 87 f1 00 00:32:38.600 READ DMA [OBS-5] ef 03 45 01 00 00 b0 08 00:32:34.600 SET FEATURES [Set transfer mode] c6 03 10 01 00 00 b0 08 00:32:34.600 SET MULTIPLE MODE 10 03 3f 01 00 00 bf 08 00:32:34.600 RECALIBRATE [OBS-4] 91 03 3f 01 00 00 bf 08 00:32:34.600 INITIALIZE DEVICE PARAMETERS [OBS-6] SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging ################################################################################################ ################################################################################################ #7 === START OF INFORMATION SECTION === Device Model: WDC WD1200LB-00EDA0 Serial Number: WD-WMAES1315951 Firmware Version: 15.05R15 User Capacity: 120.034.123.776 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jun 02 02:01:50 2008 WS SMART support is: Available - device has SMART capability. Disabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3810) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 53) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 142 139 021 Pre-fail Always - 3425 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 184 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 11889 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 154 194 Temperature_Celsius 0x0022 115 253 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 155 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.