smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 family Device Model: ST3160211AS Serial Number: 6PT0DXSF Firmware Version: 3.AAE User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Sep 29 10:16:39 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 095 082 006 Pre-fail Always - 25198108 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2306 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 134715104 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3416 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2265 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1187 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 059 052 045 Old_age Always - 41 (Min/Max 26/46) 194 Temperature_Celsius 0x0022 041 048 000 Old_age Always - 41 (0 12 0 0) 195 Hardware_ECC_Recovered 0x001a 047 043 000 Old_age Always - 220882259 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 1248 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1248 occurred at disk power-on lifetime: 1487 hours (61 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 5f 30 04 cd e0 Error: ICRC, ABRT 95 sectors at LBA = 0x00cd0430 = 13435952 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d8 00 8f 03 cd e0 00 00:00:48.618 READ DMA EXT 25 d8 00 8f 02 cd e0 00 00:00:48.616 READ DMA EXT 25 d8 00 8f 01 cd e0 00 00:00:48.615 READ DMA EXT 25 d8 00 8f 00 cd e0 00 00:00:48.613 READ DMA EXT 25 d8 00 8f ff cc e0 00 00:00:48.611 READ DMA EXT Error 1247 occurred at disk power-on lifetime: 1464 hours (61 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ce b8 d6 e0 Error: UNC at LBA = 0x00d6b8ce = 14072014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 80 6f b8 d6 e0 00 00:04:59.821 READ DMA EXT 25 03 01 f0 62 a9 e0 00 00:04:59.821 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:59.821 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:59.798 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:59.797 READ DMA EXT Error 1246 occurred at disk power-on lifetime: 1464 hours (61 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ce b8 d6 e0 Error: UNC at LBA = 0x00d6b8ce = 14072014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 80 6f b8 d6 e0 00 00:04:56.809 READ DMA EXT 25 03 01 f0 62 a9 e0 00 00:04:56.786 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:56.786 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:56.785 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:56.727 READ DMA EXT Error 1245 occurred at disk power-on lifetime: 1464 hours (61 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ce b8 d6 e0 Error: UNC at LBA = 0x00d6b8ce = 14072014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 80 6f b8 d6 e0 00 00:04:53.790 READ DMA EXT 25 03 01 f0 62 a9 e0 00 00:04:53.790 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:53.732 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:53.732 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:53.675 READ DMA EXT Error 1244 occurred at disk power-on lifetime: 1464 hours (61 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ce b8 d6 e0 Error: UNC at LBA = 0x00d6b8ce = 14072014 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 80 6f b8 d6 e0 00 00:04:50.737 READ DMA EXT 25 03 01 f0 62 a9 e0 00 00:04:50.737 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:50.680 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:50.680 READ DMA EXT 25 03 01 00 00 00 e0 00 00:04:50.680 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3399 - # 2 Extended offline Interrupted (host reset) 60% 2599 - # 3 Short offline Completed without error 00% 18 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.