smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026AS Serial Number: 3JT0PJW3 Firmware Version: 3.05 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Tue Oct 4 20:59:22 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 060 049 006 Pre-fail Always - 121017924 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1320 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 319358797 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 20005 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2488 194 Temperature_Celsius 0x0022 026 068 000 Old_age Always - 26 195 Hardware_ECC_Recovered 0x001a 060 048 000 Old_age Always - 121017924 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 144 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 144 occurred at disk power-on lifetime: 19928 hours (830 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 70 84 47 e8 Error: UNC 3 sectors at LBA = 0x08478470 = 138904688 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 6d 84 47 e8 00 01:58:47.382 READ DMA 27 00 00 00 00 00 e0 00 01:58:47.374 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 01:58:47.374 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 01:58:47.368 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 01:58:43.577 READ NATIVE MAX ADDRESS EXT Error 143 occurred at disk power-on lifetime: 19928 hours (830 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 70 84 47 e8 Error: UNC 3 sectors at LBA = 0x08478470 = 138904688 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 6d 84 47 e8 00 01:58:47.382 READ DMA 27 00 00 00 00 00 e0 00 01:58:47.374 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 01:58:47.374 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 01:58:47.368 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 01:58:43.577 READ NATIVE MAX ADDRESS EXT Error 142 occurred at disk power-on lifetime: 19928 hours (830 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 70 84 47 e8 Error: UNC 3 sectors at LBA = 0x08478470 = 138904688 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 6d 84 47 e8 00 01:58:39.773 READ DMA 27 00 00 00 00 00 e0 00 01:58:36.025 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 01:58:36.025 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 01:58:36.016 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 01:58:43.577 READ NATIVE MAX ADDRESS EXT Error 141 occurred at disk power-on lifetime: 19928 hours (830 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 70 84 47 e8 Error: UNC 3 sectors at LBA = 0x08478470 = 138904688 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 6d 84 47 e8 00 01:58:39.773 READ DMA 27 00 00 00 00 00 e0 00 01:58:36.025 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 01:58:36.025 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 01:58:36.016 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 01:58:36.009 READ NATIVE MAX ADDRESS EXT Error 140 occurred at disk power-on lifetime: 19928 hours (830 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 70 84 47 e8 Error: UNC 3 sectors at LBA = 0x08478470 = 138904688 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 6d 84 47 e8 00 01:58:32.268 READ DMA 27 00 00 00 00 00 e0 00 01:58:36.025 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 01:58:36.025 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 01:58:36.016 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 01:58:36.009 READ NATIVE MAX ADDRESS EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 19998 - # 2 Extended offline Completed without error 00% 19993 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.