yo,

mein mich eigtl. bis dato sehr zufriedenstellender WinXP-Pro-Rechner überraschte mich am WE mit einem "unmountable boot volume"-Bluescreen... jetzt läuft er wieder dank der Installations-CD und dem "chdsk /r"-Befehl.

Allerdings dauert das Hochfahren jetzt extrem lange (also der Bildschirm mit dem blauen Windows-Ladebalken) und Spiele ruckeln... sowie -was das schlimmste ist- Soundwiedergabe setzt aus bzw. stottert (vorallem wenn man mehrere Spuren parallel laufen lässt)...

Was kann ich tun?

D:\smartmon\smartmontools\bin>smartctl -l error sda
smartctl 5.39.1 2010-01-28 r3054 [i686-pc-mingw32-xp-sp3] (sf-win32-5.39.1-1)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 72 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 72 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
When the command that caused the error occurred, the device was active or idle
.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 ef a6 14 e1 Error: UNC 8 sectors at LBA = 0x0114a6ef = 18130671

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 ef a6 14 e1 00 00:42:45.875 READ DMA
ec 00 00 00 00 00 a0 00 00:42:44.188 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:42:44.125 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:42:44.125 IDENTIFY DEVICE

Error 71 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
When the command that caused the error occurred, the device was active or idle
.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 ef a6 14 e1 Error: UNC 8 sectors at LBA = 0x0114a6ef = 18130671

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 ef a6 14 e1 00 00:42:44.063 READ DMA
ec 00 00 00 00 00 a0 00 00:42:42.375 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:42:42.313 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:42:42.313 IDENTIFY DEVICE

Error 70 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
When the command that caused the error occurred, the device was active or idle
.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 ef a6 14 e1 Error: UNC 8 sectors at LBA = 0x0114a6ef = 18130671

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 ef a6 14 e1 00 00:42:42.250 READ DMA
ec 00 00 00 00 00 a0 00 00:42:40.563 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:42:40.500 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:42:40.500 IDENTIFY DEVICE

Error 69 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
When the command that caused the error occurred, the device was active or idle
.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 ef a6 14 e1 Error: UNC 8 sectors at LBA = 0x0114a6ef = 18130671

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 ef a6 14 e1 00 00:42:40.438 READ DMA
ec 00 00 00 00 00 a0 00 00:42:38.750 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:42:38.688 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:42:38.688 IDENTIFY DEVICE

Error 68 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
When the command that caused the error occurred, the device was active or idle
.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 ef a6 14 e1 Error: UNC 8 sectors at LBA = 0x0114a6ef = 18130671

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 ef a6 14 e1 00 00:42:38.625 READ DMA
ec 00 00 00 00 00 a0 00 00:42:36.938 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:42:36.875 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:42:36.875 IDENTIFY DEVICE



smartmon Lang-Test läuft.

Dieser Beitrag wurde von Giovanni: 27 Feb 2010, 23:13 bearbeitet